<- cd /life
> cat ./life/wiring-up-the-office-and-bringing-the-gs308ep-online.md_

Wiring Up the Office and Bringing the GS308EP Online

Nov 14, 2026•1 min readDEPLOYEDHardware
#Networking

I finally wrapped up the physical network overhaul in my office. After terminating a fresh batch of custom T568B CAT6 cables and crimping the RJ45 ends, the entire room is hardwired and running through my new NETGEAR GS308EP 8-port PoE+ managed switch.

Every core machine now has a dedicated wired run instead of relying on ad-hoc patch cables or wireless uplinks:

  • Uplink & Gateway: Wired straight into the Zain 5G router, with the DHCP pool shifted to .150-.254 and static MAC bindings locked in.
  • Core Lab Infrastructure: The GS308EP sits on a fixed IP at 192.168.8.120, right alongside my Dell OptiPlex 7000 Proxmox VE host at 192.168.8.100.
  • Workstations & Test Rig: Both my main desktop and the OptiPlex 7050 field test rig have clean, dedicated ports ready to go.

Getting the physical layer sorted out was step one. Next, I'm looking forward to digging into the GS308EP's management interface, experimenting with 802.1Q VLAN segmentation for my Proxmox VMs, and setting up port mirroring to capture live traffic off the test rig.